BLLAZE CONE RIGHT BLACK
All Motogadget indicators are E1 approved (European standards) and their mark affixed to the aluminum casing allows their legal use. The M-blaze turn signals use a patented technology called Tranzlight which allows the complete body to behave like the light source itself. This technology makes it possible to have extremely high-performance and highly visible illumination under all conditions. They are at the same time very discreet and allow an optimal finish, and both very visible when they are live, the light diffused by the turn signal being visible at 180 °, front and back. They are designed to be mounted on handlebars of 22mm or 25.4 mm with an inside diameter of 14 to 21 mm. The diameter of the body is 35 mm. Be careful to order a complete right + left kit as they are different.
- If your motorcycle is originally fitted with 10W or 21W bulb indicators, when you replace them with LED indicators, they will flash too quickly or not at all.
To compensate for this, it is enough to integrate resistors in the circuit in order to create a resistive load sufficient for the proper functioning of the flashing relay (see articles offered below)
- If your motorcycle is equipped with an original LED light, nothing is to be expected.
- For Triumph from 2016 a mode is provided for this purpose, no need for resistance, please follow the manipulation below:
1 / First of all, motorcycle on the stand with the key off.
2 / Hold the "i" button on the left comodo for a few seconds then switch on the ignition.
3 / When the dashboard lights up it will display type. Release the "i" button, then to change the mode by simply pressing the "i" button. Try all the modes until you find the one that suits you.
4 / To confirm the choice of mode, press the "i" button for a few seconds.