Pair of FLEX LED turn signals on fork tube

In stock

75.00
TTC


Pair of FLEX LED turn signals on fork tube
 
Totally flexible and flexible.
 
Length 11cm
 
Thickness x width = 8 x 8mm
 
Semi smoked Fixing by Rilsan and 3M (supplied)
 
NOT APPROVED ON THE PUBLIC PATH

WARNING :

- If your motorcycle is originally fitted with 10W or 21W bulb indicators, when you replace them with LED indicators, they will flash too quickly or not at all.
To compensate for this, it is enough to integrate resistors in the circuit in order to create a resistive load sufficient for the proper functioning of the flashing relay (see articles offered below)

- If your motorcycle is equipped with an original LED light, nothing is to be expected.

- For Triumph from 2016 a mode is provided for this purpose, no need for resistance, please follow the manipulation below:
1 / First of all, motorcycle on the stand with the key off.
2 / Hold the "i" button on the left comodo for a few seconds then switch on the ignition.
3 / When the dashboard lights up it will display type. Release the "i" button, then to change the mode by simply pressing the "i" button. Try all the modes until you find the one that suits you.
4 / To confirm the choice of mode, press the "i" button for a few seconds.

Accessories

Product Note Status Price
RESISTANCE FOR FLASHING LED RESISTANCE FOR FLASHING LED
3.99 €
RESISTANCE FOR FLASHING LEDS 25W 10 OHMS X2 RESISTANCE FOR FLASHING LEDS 25W 10 OHMS X2
13.90 €
Display accessory details

Browse this category: TURN SIGNALS - for Triumph Hinckley Bonneville, Scrambler, Thruxton et Café Racer