(0)
SHOP TURN SIGNALS
TURN SIGNALS - for Triumph Hinckley Bonneville, Scrambler, Thruxton et Café Racer
WARNING :
- If your motorcycle is originally fitted with 10W or 21W bulb indicators, when you replace them with LED indicators, they will flash too quickly or not at all.
To compensate for this, it is sufficient to integrate resistors in the circuit in order to create a resistive load sufficient for the proper functioning of the flashing relay (see articles offered with each flashing)
- If your motorcycle is equipped with an original LED light, nothing is to be expected.
- For Triumph from 2016 a mode is provided for this purpose, no need for resistance, please follow the manipulation below:
1 / First of all, motorcycle on the stand with the key off.
2 / Hold the "i" button on the left comodo for a few seconds then switch on the ignition.
3 / When the dashboard lights up it will display type. Release the "i" button, then to change the mode by simply pressing the "i" button. Try all the modes until you find the one that suits you.
4 / To confirm the choice of mode, press the "i" button for a few seconds.
Triumph Bonneville Firstracer LED turn signals kit with bracketsThis kit allows you to change your original turn signals by relocating them using our brackets provided to offer a sleek design. |
Integrated LED front turn signals and position lightIntegrated LED front turn signals and position light |
Bullet Atto DF, rear / brake light turn signal, black, clear glass, pieceBullet Atto DF, rear / brake light turn signal, black, clear glass, pieces |
|
Bullet Atto Dark LED-indicator from Kellermann, smoke lens x1Bullet Atto Dark LED-indicator from Kellermann, black, dark tinted lens, E-marked Sensationally small, spectacularly bright!
|
MOTOGADGET m-BLAZE Disc, LH sidem-Blaze Disc by motogadget – a turn signal for handlebar end installation in a trend-setting design
|
Turn Signal M-Blaze Pin MotogadgetThe m-Blaze Pin from motogadget – setting new benchmarks for bolt-on turn signals with Power LED technology. |
turn signals SHIN YO Arizona BlackThese turn signals are CNC machined aluminum, black anodized. They will give a sporty and... |
turn signals SHIN YO Arizona ChromThese turn signals are CNC machined aluminum, chrom anodized. They will give a sporty and... |
HIGHSIDER LED taillight / indicator CONEROBright shining LED combination with the latest COB technology and smoke lens. Premium quality made of aluminium. Black anodized, cylindrical housing with polished chamfers give this model an elegant, stylish design. E-mark for rear installation. |
ZC-Line fork indicator micro 41mm/49mm/56mm SILVER/BLACKHigh quality aluminum machined from one piece CNC and brushed.
|
ZC-Line fork indicator CLASSIC 41mm/49mm/56mm BLACKHigh quality aluminum machined from one piece CNC and brushed.
|
ZC-Line fork indicator CLASSIC 41mm/49mm/56mm SILVERHigh quality aluminum machined from one piece CNC and brushed.
|
Mini turn signals leds cafe racer the pair AluBeautiful Mini LED direction indicators such aluminium shell |
Mini turn signals leds cafe racer the pairBeautiful Mini LED direction indicators such black anodized shell |
Mini flashers CHROME Micro flash CE APPROVEDSet of indicators MINI CATEYE, E-tested |
Mini Turn signals Micro Flash Homologués CESHIN YO Mini indicator with a black housing and smoke lens, stem lenght 22 mm, lens diameter 36 x 29 mm, bolt M10, incl. 12V/21W halogen bulb, pair |
|
turn signals SHIN YO Arizona ChromThese turn signals are CNC machined aluminum, chrom anodized. They will give a sporty and... |
|
Black aluminum HIGHSIDER BRONX LED turn signals CE approvedGive a sleek look to your motorcycle with these very beautiful indicators. |
Pair of LED bar end indicator C.E Ultra Thin - BlackThese ultra-thin, black finish turn signals will refine the front of your motorcycle. C.E approved |
Support front turn signal Firstracer until 2015This new medium of flashing before Firstracer is very sleek and discreet. It is located behind the controller or regulator of the original setting (if it is moved on the frame). |
|
Triumph Firstracer Front Turn Signal SupportThis new, highly resistant, front turn signal fixture gives you the opportunity to change your original turn signals. It is placed on the original fixing of the radiator. |
Triumph Firstracer Shock Absorber BracketsThese new stylish and highly resistant brackets will allow you to move your rear turn signals on the shock absorber attachments for a more aesthetic fit. |
Indicator bracket on Black Motone rear shock absorbersThese brackets allow you to move the rear turn signals at the shock absorbers for your prepaunch. |
Turn Signal Adapters for Triumph Twins MOTONEAdapters for mounting custom indicators on Triumph Twin 2016+ (900 / 1200cc). Sold in pairs with all the fixings necessary for its assembly. |
Flashing adapters for Triumph 2016+ (900 / 1200cc). Sold in pairs with fixing screws.Adaptateurs deSuitable for all turn signals mounted on 8mm or 10mm threaded rod, provided they have a mounting thread of 22mm or +. |
Motone Customs Rear Under Seat Signal BracketsRelocates Rear Signals near Rear Of seat : Fits all Year Bonneville/Thruxton/Scrambler 2001 to Present: Black Coated to blend in with Sub Frame: Sold In pairs |
Indicators Triumph connector adapter - pair 2016Indicators Triumph connector adapter
|
|
RESISTANCE FOR FLASHING LEDMounts directly in parallel on your LED turn signals to create a resistive load for the flasher relay normally works as with conventional bulbs. |
RESISTANCE FOR FLASHING LEDS 25W 10 OHMS X2RESISTANCES FOR FLASHING LEDS 25W 10 OHMS X2 |
